|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
: : : : HOME : : ABOUT : : QUALITY : : PRODUCTS : : FEEDBACK : : CONTACT : : : : |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Reactive 'HE' Dyes...He Dyes are Reactive Dyes for Cellulosic material and designed to give high fixation by exhaust dyeing method when applied at the temperature 75ºC-95ºC. METHOD OF DYEING: By Exhaust Dyeing: Take well prescoured fabric and ensure that the pH of the fabric is 7, if require adjust pH by adding Acetic Acid. Take soft water for dyeing, if the water is hard, add sequestering agent to achieve best result. Set the dye bath at 50ºC and add predissolve dye in two portion and run for 10 min. Add 5 gms./lit. common salt for deep shade (2.5 gms./lit. for pale shade) and run for 10 min. start raising temperature to 80ºC - 85ºC in 30 min. During raising temperature, 20 gms./lit. common salt (10 gms./lit. for pale shade) after first 10 min. and add 25 gms./lit. common salt (8 - 10 gms./lit. for pale shade) after another 10 min. and continue dye for 15 min. after reaching the temperature to 80ºC - 85ºC. Add Alkali slowly in 15 min. and continue dyeing for further 45 - 75 min. SALT AND ALKALI REQUIREMENTS FOR REACTIVE HE DYES
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Denim Dyes &
Chemicals |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||