|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
: : : : HOME : : ABOUT : : QUALITY : : PRODUCTS : : FEEDBACK : : CONTACT : : : : |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Reactive 'ME' Dyes...INTRODUCTION: Reactive Cold Brand Dyestuffs are fibre reactive dyes which form a chemical linkage with Hydroxyl groups of Cellulose and thus give dyeing and printing good fastness to wet treatments. DISSOLVING OF DYESTUFF: Dyestuff is pasted with cold water and dissolved by strring with warm water at 50ēC. DYEING OF COLD BRANDS REACTIVE DYES: (for jigger dyeing): Set the dye bath at 30-40ēC temperature and Load the goods. Run for 5-10 minute. Add Common Salt or Caleined Gluber's Salt 25 to 50 g/lit., and runfor 20-30 minutes. Add dissolved Soda Ash, 2 to 10 g/lit. and continue dyeing for 30-60 minutes. For better Fixation raise the temperature to 60ēC in 30 minutes, offer Soda Ash addition and run dye bath for 60 minutes. REMARK: Low substantive Dyes are not suitable by exhaust method. For 'me' Brand Dyeing, Standard Salt and Alkali are required.
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Denim Dyes &
Chemicals |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||